·        M.P. Sacks and D.L. Allen, "Effects of High-Intensity Sound on Muffler Element Performance", [Journal of the Acoustical Society of America], Vol. 52, No. 3 (Part 1), p. 725-731, September, 1972.

·        M.P. Sacks, R.T. Lake and K.R. Cooper, "Design of Tuned Mass Dampers for the La Prade Heavy Water Plant", Presented to the Canadian Society for Civil Engineering Structural Engineering Conference, Montreal, Quebec, June 7-8, 1979.

·        M.P. Sacks and S. Hackney, "Measurement Techniques for Engine Induction System Components", [Proceedings of the Canadian Acoustical Association], p. 152-157, Calgary, Alberta, Oct. 5-9, 1987.

·        M.P. Sacks and S. Hackney, "Performance of Acoustic Components for Engine Induction Systems", SAE Technical Paper # 880081, International Congress and Exposition, Detroit, Michigan, Feb. 29 to Mar. 4, 1988.

·        M.P. Sacks and S. Hackney, "Use of Measured Source Characteristics to Predict the Acoustic Performance of Engine Induction Systems", [Proceedings of Noise-Con 88], p. 261-266, Purdue University, West Lafayette, Indiana, June 20-22, 1988.

·        M.P. Sacks and S. Brackett, "Subjective Evaluation of Simulated Engine Induction Noise", SAE Technical Paper # 891156, [Proceedings of the 1989 Noise and Vibration Conference], p.313-321, Traverse City, Michigan, May 16-18, 1989.

·        M.P. Sacks and S. Kraemer, "Simulation and Subjective Evaluation of Automotive Engine Induction Noise", Presented to the American Society for Engineering Education Annual Conference, Machinery Sound Quality Session, Toronto, Canada, June 24-28, 1990.

·        M.P. Sacks and J.C. Swallow, "Tuned Mass Dampers for Towers and Buildings", [Proceedings of the ASCE Structures Congress '93], Vol. 1, p. 640-645, Irvine, California, USA, April 19-21, 1993.

·        M.P. Sacks and J.C. Swallow, "Tuned Mass Dampers for High Rise Buildings - A Case Study", [Canadian Acoustics], Vol. 22, No. 3, p. 165-166, September, 1994. 

·        M.P. Sacks and J. Buttell, "Use of Synchronous Time Averaging to Extract Signals From Noise", [Proceedings of Inter-Noise 95], Vol. II, p. 1085-1088, Newport Beach, California, USA, July 10-12, 1995.

·        M.P. Sacks and J. Kane, "Development of a Tuned Resonator to Attenuate Low Frequency Sound: A Case Study", [Proceedings of the Spring Environmental Noise Conference], Alberta Energy and Utilities Board, Banff, Alberta, April 14-16, 1996. 

·        M.P. Sacks and J. Kane, "Development of a Large Reactive Silencer to Attenuate Mid Frequency Broad Band Sound: A Case Study", [Proceedings of the Spring Environmental Noise Conference], Alberta Energy and Utilities Board, Banff, Alberta, April 14-16, 1996.

·        M.P. Sacks and J. Kane, "Design of a Tuned Resonator to Attenuate Low Frequency Sound", [Proceedings of Noise-Con 96], Vol. I, p. 331-336, Seattle, Washington, USA, Sep. 29 - Oct. 2, 1996.

·        M.P. Sacks and J. Buttell, "Development of Probes to Measure In-Duct Sound Pressure Levels of a Gas Turbine Exhaust", Presented to the Canadian Acoustical Association, Windsor, Ontario, October 8-10, 1997.

·        M.P. Sacks and S. Broughton, "Development of Probes to Measure In-Duct Sound Pressure Levels of a Gas Turbine Exhaust", Paper No: 97-IAGT-503, Presented to the 12th Symposium on Industrial Applications of Gas Turbines, Canadian Gas Association, Banff, Alberta, October 15-17, 1997.

·        R. Behboudi, J.G. Kawall and M.P. Sacks, “A novel technique for measuring sound within turbulent duct flows”, Proceedings of CANCAM 99, McMaster University, Hamilton, Ontario, Canada, May 30 – June 3, 1999.

·        M.P. Sacks, R. Behboudi, J.G. Kawall, J. Buttell, “In-duct measurement of gas turbine noise emissions using a cross spectrum method”, Paper No 2000-GT-349, ASME Turbo Expo 2000, Munich, May 2000. 

·        M.P. Sacks, R. Behboudi, J.G. Kawall, J. Buttell, “Microphone probe for in-duct measurement of gas turbine exhaust noise”, Paper No 2000-GT-656, ASME Turbo Expo 2000, Munich, May 2000.

·        John Briggs, M.P. Sacks, Steven Kraemer, “Heat Recovery Steam Generator Noise Attenuation”, PowerGen 2000.

Last modified: 04/11/06